THE

HUNTERS DEN

GUNSMITHING

775-882-9594

SHOP SERVICE CHARGES

LABOR ONLY --- PARTS, MATERIAL NOT INCLUDED

~~~ 2009 ~~~

GENERAL WORK

MINIMUM SHOP CHARGE PER JOB ~ $35.00
LABOR RATE PER HOUR ~ $40.00
MAN AND MACHINE PER HOUR ~ $55.00
CLEAN, LUBRICATE - DETAIL STRIP - CHECK FOR WEAR ~ $50.00
FAULT FINDER PROCESS FOR FINDING CRACKS IN PARTS,BOLT LUGS, ~ $50.00
MAKE AND INSTALL ( OBSOLETE ) FLAT & "V" SPRINGS ~ $75.00

SHOTGUN WORK

CHECK HEADSPACE , CHAMBER LENGTH , FUNCTION ~ $35.00
LENGTHEN SHORT CHAMBERS ( PER CHAMBER ) ~ $50.00
CONVERT TO LONG FORCING CONE ~ $50.00
BACK BORING , PER BARREL , NON PLATED BORES ~ $100.00
HONE AND POLISH CHAMBER , ( PER BORE ) ~ $50.00
REBORE TO MORE OPEN CHOKE , STANDARD ( PER CHOKE ) ~ $45.00
CUSTOM CHOKE TO SPECIFICATIONS ( PER CHOKE ) ~ $75.00
CHROME LINED BORES FOR CHOKE ALTERATION , ADD ~ $50.00
CUT BARREL AND RESET SIGHT ~ $55.00
CUT BARRELS AND RESET SIGHT ON DOUBLE BARRELS + FILL IN GAP ~ $85.00
STRAIGHTEN BENT BARREL ~ $60.00
DENTS REMOVED , BASED ON TIME ( AVERAGE ) ~ $40.00
INSTALL SIGHT BEAD ( DRILL & TAP OR RETAP ) ~ $30.00
INSTALL POLY-CHOKE OR MULTI-CHOKE ~ $95.00
INSTALL SCREW IN CHOKES , REM-CHOKE , TRU-CHOKE , WIN-CHOKE ~ $95.00
CLEAN , CHASE THREADS IN BARREL FOR SCREW IN CHOKES ~ $35.00
CONVERT BROWNING 16 Ga. 2 9/16 TO 2 3/4 ~ $195.00
EXTRA BARREL FOR ABOVE ~ $75.00
INSTALL BIG HEAD SAFETIES, RIGHT OR LEFT ~ $35.00
STONE TRIGGER FOR CORRECT PULL ~ $55.00
INSTALL POLY FEATHER AIR VENT RIB ~ $150.00
RESOLDER RIB AND SPOT BLUE ~ $95.00
RESOLDER FOREND LUG ~ $90.00
REPLACE HINGE PIN ~ $150.00

RIFLE WORK

CHECK HEADSPACE AND ACTION FUNCTION ~ $35.00
POLISH ROUGH CHAMBER ( AVERAGE ) ~ $50.00
MAKE CHAMBER CAST ~ $45.00
REMOVE FIRED CASE FROM CHAMBER ~ $50.00
REMOVE LIVE ROUND FROM CHAMBER ~ $80.00
REMOVE OBSTRUCTION FROM BORE ~ $100.00
REMOVE FOULING FROM BARREL ~ $65.00
LAP BARREL ~ $90.00
CUT & CROWN BARREL ~ $45.00
REINSTALL FRONT SIGHT ON ABOVE ~ $45.00
REBARREL~INCLUDES TRUING ACTION, LAPPING LUGS (Blueprinting) ~ $295.00
INSTALL PRE-THREADED AND CHAMBERED BARREL ~ $160.00
INSTALL SAKO EXTRACTORS ( REMINGTON BOLTS ) ~ $125.00
RELINE .22 RIMFIRE BARREL ~ $125.00
SHORTEN WINCHESTER 94 AND MARLIN 336 TO 16" ( 30-30 ONLY ) ~ $175.00
INSTALL SWEPTLINE BOLT HANDLE ( WELD ON ) ~ $115.00
FORGE AND RESHAPE ORIGINAL BOLT HANDLE ~ $105.00
RESHAPE MILITARY MAUSER REAR BRIDGE ~ $75.00
RESHAPE MILITARY 1917 ENFIELD REAR BRIDGE ~ $105.00
THIN TRIGGER GUARD AND SPOT BLUE ~ $60.00
INSTALL BUEHLER STYLE SAFETY ~ $45.00
INSTALL MOD. 70 STYLE SAFETY IN MAUSERS ~ $135.00
INSTALL LEFT HANDED SAFETY ( AVERAGE ) ~ $37.50
ADJUST AND STONE REGULAR TYPE TRIGGERS AND SEARS ~ $50.00
INSTALL TIMNEY TYPE TRIGGERS ~ $40.00
INSTALL DOUBLE SET TRIGGERS ( MAUSERS ) ~ $195.00
INSTALL FRONT RAMP FOR OPEN SIGHTS ~ $60.00
DRILL AND TAP FOR SCOPE ( INCLUDES MOUNTING & BORE SIGHTING ) ~ $95.00
OPEN BOLT FACE ~ $67.50
INSTALL SCOPE AND BORE SIGHT ( PRE-DRILLED ) ~ $35.00
BORE SIGHT SCOPE OR OPEN SIGHTS ~ $30.00
DRILL AND TAP INSTALL RECEIVER SIGHT ~ $67.50
INSTALL MUZZLE BRAKE ~ $75.00

BLACK POWDER WORK

PULL BALL FROM BARREL ( AVERAGE ) ~ $60.00
REMOVE BROKEN RAMROD FROM BARREL ( AVERAGE ) ~ $60.00
ADJUST PERCUSSION HAMMER TO STRIKE NIPPLE ~ $50.00
RESOLDER THIMBLE OR RIB ~ $65.00
REMOVE BREECH PLUG~ $50.00
REHARDEN FRIZZEN ON FLINT LOCK ~ $55.00
REHARDEN AND FIT SEAR OR TUMBLER ~ $52.50

HANDGUN WORK

POLISH AND HONE - ADJUST RETIME ACTION ~ $75.00
ADJUST AND STONE SEARS FOR CORRECT PULL ~ $67.50
REHARDEN AND STONE SEARS FOR CORRECT PULL ~ $87.50
COMPLETE ACCURACY JOBS AUTOMATICS ( AVERAGE ) ~ $500.00
REVOLVER ACTION JOB ~ $105.00
INSTALL NEW REVOLVER BARREL ~ $105.00
INSTALL NEW AUTOMATIC BARREL ( AVERAGE ) ~ $80.00
INSTALL NEW RAMPED AUTOMATIC BARREL ~ $195.00
INSTALL MATCH BARREL BUSHING ON AUTOMATICS ~ $60.00
INSTALL NEW CYLINDER AND TIME ~ $105.00
RECHAMBER CYLINDER ( PER CHAMBER ) ~ $35.00
INSTALL CRANE BALL LOCK ~ $65.00
INSTALL TARGET TYPE SIGHTS ( AVERAGE ) ~ $90.00
INSTALL MILLETT REGULAR SIGHTS W/DUAL CRIMP FRONT ~ $57.50
INSTALL MILLETT LOW PROFILE W/DUAL CRIMP FRONT ~ $145.00
INSTALL TARGET RIBS ( AVERAGE ) ~ $95.00
INSTALL FRONT SIGHT INSERT - RED - ORANGE - WHITE - YELLOW ~ $60.00
INSTALL WHITE OUTLINE REAR SIGHT ( S&W ) ~ $35.00
BEVEL MAGAZINE WELL ( AUTOS ) ~ $60.00
OPEN EJECTION PORT ( AUTOS ) ~ $75.00
THROAT BARREL AND POLISH FEED RAMP ~ $67.50
TIGHTEN SLIDE ( AUTOS ) ~ $105.00
INSTALL OVERSIZED GRIP SCREW BUSHINGS COLT 1911 GOV'T ~ $57.50
INSTALL WIDE GRIP SAFETY COLT 1911 GOV'T ~ $65.00
INSTALL NEW HAMMER COLT 1911 GOV'T ~ $55.00
INSTALL NEW TRIGGER COLT 1911 GOV'T ~ $50.00
INSTALL AUTO PISTOL COMPENSATOR ( AVERAGE ) ~ $185.00
SHORTEN RUGER S.A. TO LENGTH, RESET FRONT SIGHT, REBLUE ~ $155.00
CURING HAMMER PUSH OFF ( REVOLVERS ) ~ $50.00

METAL REFINISHING

DRAW FILING MILITARY BARRELS ~ $55.00
ENGINE TURN BOLT ( JEWEL ) ~ $75.00
ENGINE TURN HAMMER AND TRIGGER ( JEWEL ) ~ $70.00
METAL CHECKERING ( PER HOUR ) ~ $45.00

STOCK WORK

NOTE: WE NO LONGER DO STOCK REFINISHING AND CHECKERING.

GLASS BED , ACCURACY BEDDING W/ MONEL SPACER BUSHINGS ALSO KNOWN AS PILLAR BEDDING, FULL GLASS WITH FREE FLOAT BARREL. ~ $145.00
INSTALL RECOIL PAD ~ $45.00
INSTALL RECOIL PAD ( HOLLOW STOCKS AND COMPOSITE STOCKS ) ~ $65.00
INSTALL RECOIL PAD ( SAKO STOCKS W/ STEEL PINS AND GLUED PADS ) ~ $65.00
INSTALL RECOIL PAD W/ SPACERS FOR EXTRA LENGTH ~ $65.00
INSTALL SLING SWIVELS ( STANDARD STYLE ) ~ $35.00
INSTALL SLING SWIVELS ( PACHMAYR FLUSH STYLE ) ~ $75.00
INSTALL FIBERGLASS STOCK BLANK ~ $275.00
CAMO PAINTING STOCK ~ $125.00
INSTALL AND FIT PREFINISHED SYNTHETIC STOCK ~ $80.00
INSTALL CROSS BOLT ~ $90.00
INSTALL RECOIL REDUCER ( BEAR TRAP , ETC. ) ~ $95.00

THE HUNTERS DEN

GUNSMITHING

1305 CAMILLE DR.

CARSON CITY, NV 89706-2612

PHONE & FAX  ~ 775-882-9594

Home I Products I Service

Electronic mail

                   
General Information and Sales:  sales@thehuntersden.com

02/15/2011